Відео

do you prefer this rieju or ktm 300?

6 ro 9 psi is leaving so much low speed traction on the table.. i usually leave the truck at 5 and air Dow from there.

Between this and a TM EN 300 2 stroke fuel injected?

You're so lucky that come out normally that does not happen

You're not using the drop center of the rim!!! 100% easier if you do

350 hours thats crazy

what vision skateboard do you have ?

The cheapest tire changing stand, is a 30 gallon barrel from an oil change place. Its free! And just the right diameter and is a good heidth. Being anywhere near to the ground is not the place to change a tire....................I use a cheap bead breaker from harbor freight, its not big but it works every time. Mighta been 25 bucks.

Those are definitely good tires. I think i prefer the Equilibrium for the high Sierra secret single track that i ride a lot

I had not ever seen anyone try to use the bead breaker to put a new tire ON, Mine ( old pos harbor freight ) sometimes ruins the side wall of tires I am taking off. I got the bike tire kit with mine so I can stand up, I hate all that knees on the concrete crap, thing with the harbor freight one though is the bar in the middle fits NO axle hole I have ever seen LOL. You have to make your own. Maybe if you had a Duck head attachment to put on wheel the bead breaker is you could position the spoon under that pin you keep pulling out and drop the duck head in on the breaker bar and then grab the whole tire and twist it on. Sternum strainer! LOL I like mine better than what that demo just let me know and I actually hate mine , I just need to spend some time making some new parts for it. so that would cut into RIDE TIME though. maybe next winter. Great Video! I saw that thing you have there at harbor freight the other day, came here to see how it works. saved me some dough, also the bike wheel balancer, saved some dough there, I just use jack stands and the axle, works great.

I have a 2019 Husqvarna TX300 last year of the carb with 60 hours on it now and its the beest bike ive ever had. Im also using the Lectron carb on it and love it. I like the simplicity of the carb bike. Thanks for the video.

Nice review. Do you feel the valves openning ? Does it vibrates? Thank you

What are most of the guys running for a rear tire and front tire?

What’s your favorite Colorado single track?

Im pretty sure that bike is going to press charges against you for bike abuse 😬

what start/ kill switch do you have

The fork plastick dont look Ktm, what model they fit and go arround the shinny pipe?

Nice job on the trail and I liked the voiceover thing!

Hi there Trailbound co. A company in Canada called FischMoto makes a USDA forestry service approved spark arrestor that will slip into a EC 250/300 muffler. I found that spark arrestor at Rocky Mountain ATVMC. I purchased one that slips into the exhaust pipe on my CZ 250 that I got from Charlie Richardson at CR Performance.

Looks like a 70's Firebird motorcycle club desert race to me

would anyone recommend using this tire in front? i have a 19 inch front rim?

Didn’t have a dolly so used my muscle back is fukkked lol

Thanks man, I had the same exact thoughts. I went with the TX 300. Great height and ergo

I never considered buying a Gasgas until I found out they are made by KTM factory. I’m reading a lot of good reports on the EC 300. The only downfall is that the 2024 models do not come with a map switch and the mufflers are not USFS approved. Hopefully on the 2025 models at least the muffler will be USFS approved.

Torn between the two… looking at 250 or 300 for hare scrambles. Great video!

I ran 6 psi in mine for 2 years still had 50% tread and way way over 40 hours of riding. Low power 4 stroke trail bike. Liked the tire however in PA once it gets wet in late fall it stays wet and on roots in wet top soil etc the tire spins way more than I like. Excellent dry weather tire, that lasts a long time.

These riders make this easy. Great riding! Great commentary!

Both 2 stroke :)

My last 2T was a 17 XCW 300 and I did do the SX300 head and cdi. Kept the head and went back to stock cdi as it started better and ran really nice down low. Will probably do the same to my TE300pro, just bump up compression a little.

I bought the 24 TE300pro and have ridden the 24TX300 and found the tx to be too jumpy on slippery turns where is the te is smoother and easier to maintain traction. The TX is significantly louder so dont let the quiet TE/XCW exhaust fool you with where the bike is with the RPM and power curve. You do have to twist the throttle more if you want to apply more power. It is like the first half of the throttle is really dumbed down, but over half really jumps to life just fine. The TE/XCW pulls really well and controlled at really low rpm without spinning out much.

I was involved in quite a spectacular RTC, my mate had managed to stop in front of me his brother had already gone between a car and a van and all of a sudden I lost all rear break pressure (all on mountain bikes) and I took my mate through the back window at about 30mph. Aged 27 I didn't feel it until I went to pick up my bike when I got to the hospital they thought it was going to be a dislocated shoulder (they hadn't assessed me, rushed me for xrays) when the adrenaline wore off the pain was INSANE! I made it home and got lots of rest. Queue a 3 week wait to see the surgeon (NHS) it was grade 5 and he recommended I go straight for surgery....I had a 2 week wait then a cancelled surgery in all I waited 3 weeks, surgeon apologized cause he had to cut a lot of scar tissue away. I went for the nerve block and there's no way I wouldn't just make sure you have something around you to pull you up - You''ll need someone around you for 2 days straight. I just want to say it wasn't done right, the tape used was too long and my collar bone is now sticking out pretty much the same amount sometimes it just feels just full of dull pain that's not quite pain - Fix it asap just make sure your surgeons decent.

Just curious, how tall are you? Im 5’10” been running for about a year and a half on a KX250F motor cross bike beating my self up on the trails but I want to move to a trail bike. I feel like the hight of the bike might have set me back a little but just curious.

Agreed about the longer races being good to get the full intensity and grit out of the sport, rather than the shorter 2-3 hour stuff

Thanks for the coverage and commentary dude, really cool event and well covered

Insane, I'm impressed

Love the thumbnail! You are welcome for the epic fail footage 🤪 5:49

It's amazing what these guy can do on these bikes.

The best commentary!

What rear tire is Webb running? Doesn’t look like any Dunlop gummy I’ve seen before.

Dude with the seat was carrying it for his buddy. That's all I learned in the parking lot from him. They were all smiles about it though.

Cody on fire recently.

Been wondering where Trailbound has been... Excellent commentary! Heal up soon so we can watch your vids again.

Billy mani Johnny taddi were all missing from that line up . But we’re probably see some off these boys at erz berg

Awesome. Thank you.

A much-needed commentary for the sport. Thank you!

Well done, thanks, good luck with the shoulder, r u planning to make it 4 SKHE?

World class commentary!

It is a 16-18 gas gas lowest spec

Can i use this as front tore

yeah Carnage canyon is a real b****. started up it once but we were too tired by then to complete. not many people can make it up on a dirt bike so damn good riding. I did walk it and recognized every difficult spot an agreed with most of your lines. ended up breaking my foot in five places on Chinaman gulch which is what you came down on. oh well that's dirt biking